Freon condenser

The ATC series air-cooled Freon condenser with a wide range of 7 to 240 kW meets a variety of refrigeration needs.

If needed and according to the order, it is possible to design and manufacture freon condenser with required capacity.

Air-cooled Freon condenser compatible with Freon family refrigerants and suitable for air conditioning, sub-zero cold storage

Cold room above zero, meat cold room, chicken cold room, fish and shrimp cold room, fruit and vegetable cold room, drug storage cold room

And the freezing tunnel is designed to operate in moderate, hot and dry weather conditions with temperatures of 20 to 55 degrees Celsius.

Condenser body

ATC air-cooled Freon condenser has a solid body and is resistant to the effects of atmospheric factors and corrosion

And it is a very suitable option for use in harsh weather conditions. Condenser body made of pre-galvanized iron sheet

It is coated with electrostatic paint, which minimizes the rate of corrosion and decay of the device.

The condenser is placed on a chassis made of galvanized sheet with electrostatic paint.

Condenser coil

Air-cooled Freon condenser coil is made of copper tubes and aluminum fins with sinusoidal wave patterns.

The distance between the fins and the tubes has been minimized by the mechanical expand method and has increased the heat transfer coefficient in these coils to a significant extent.

The distance between the fins can be 3 or 4 mm. ATC Freon condenser is compatible with R507, R502, R134-A, R404-A and R22 refrigerants.

Condensers are tested with nitrogen gas up to 450 psi pressure.

Condenser fan

Aeration in an air-cooled Freon condenser using axial-type refrigerator reverse-cycle electrofans from Zilabag brands

Or German EBM is done with the lowest possible noise. The protection class of condenser fans is IP54 and they have a one-year warranty.

The diameter of the fans is chosen from 30 to 63 cm according to the capacity of each condenser.

Also, the electrical characteristics of the fans are 380v/50Hz or 220v/50Hz, which are installed in the distribution box built on the condenser body.

Condenser accessories
A receiver tank according to the capacity is installed under the air-cooled Freon condenser.
A receiver valve is considered appropriate for the size of the liquid line.
Adjustable bases are installed on the chassis to install the compressor.

Contact us for communication

09176951823

07137734724

How to choose an air-cooled Freon condenser

To choose a condenser, you should use the following relationship and tables.

QN = QD × CC × CR

QD = Q + PC

QN = nominal capacity of the condenser

Q = evaporator capacity (refrigerating power of the compressor at the corresponding operating temperature)

QD = required heat dissipation capacity

CC = capacitance correction factor

CR = Refrigerant correction factor

PC = compressor power consumption

Δθ = difference between distillation temperature and ambient temperature

Design and manufacture of air-cooled Freon condenser based on standards
American Standard ARI 460-2000 on Forced Air-Cooled Condensers
American National Standard ANSI/ASHRAE 1997-20 on methods of measuring the capacity of air-cooled condensers with forced air circulation
European standard ENV 327 on the subject of testing air-cooled condensers with forced air circulation